Made from tough and durable 6mm polypropylene
E
nsures a smooth straight cut
Use with guide bush and ¼" cutter
Caters for 6 different worktop widths
300, 450, 500, 600, 618, & 650mm
Two connector bolt slots
Simple to follow instructions, 3 nylon alignment pegs included
DIY Worktop jig for ¼" routers
Description
Product
Comments
Price
 
  Worktop Cutter
¼" TCT cutter with ¼" shank
Quarter inch cutter 82mm long
for ¼" collet
£
Quantity:
  Jig Carry Bag
 for 720 template
Black polyester carry bag with handles
£
Quantity:
Solo Clamp
Simple one handed operation
150mm jaw  opening
£
Quantity:
Connector bolts
More>>>>
150mm long
Zinc plated
£
Quantity:
Colorfill
More>>>>
Joint sealer & laminate repair compound
£
henderson plastics main
Code
Worktop Corner Mitre Template
£
WTJ10/25
Use with ¼" cutter and 10mm guide bush
WTJ12/25
Use with ¼" cutter and 12mm guide bush
WTJ14/25
Use with ¼" cutter and 14mm guide bush
WTJ16/25
Use with ¼" cutter and 16mm guide bush
WTJ17/25
Use with ¼" cutter and 17mm guide bush
WTJ18/25
Use with ¼" cutter and 18mm guide bush
WTJ24/25
Use with ¼" cutter and 24mm guide bush
WTJ25/25
Use with ¼" cutter and 25mm guide bush
WTJ30/25
Use with ¼" cutter and 30mm guide bush
All templates are £40.63 inc VAT
How to order
To make sure you order the correct template check guide bush supplied with your ¼" router.  Next measure the guide bush across the outside diameter of the short tube.
From the list below select the cutter and guide bush combination which matches with yours


For example, if your guide bush measures 17mm across then order WTJ17/25
Back >>>
Back >>>
Download Instructions