template

Code	Worktop Corner Mitre Template
WTJ18/5		Use with ½" cutter and 18mm guide bush
WTJ20/5		Use with ½" cutter and 20mm guide bush
WTJ22/5		Use with ½" cutter and 22mm guide bush
WTJ23/5		Use with ½" cutter and 23mm guide bush
WTJ30/5		Use with ½" cutter and 30mm guide bush
WTJ38/5		Use with ½" cutter and 38mm guide bush

Made from tough and durable 6mm polypropylene
Ensures a smooth straight cut
Use with guide bush and ½" cutter
Caters for 6 different worktop widths
300, 450, 500, 600, 618, & 650mm
Two connector bolt slots
Simple to follow instructions, 3 nylon alignment pegs included

How to order
To make sure you order the correct template check guide bush supplied with your ½" router. Next measure the guide bush across the outside diameter of the short tube.
From the list below select the cutter and guide bush combination which matches with yours

For example, if your guide bush measures 30mm across then order WTJ30/5

Description	Product	Comments	Price
Worktop Cutter ½" TCT cutter with ½" shank		Half inch cutter 4" long ( 100mm) for ½" collet	£	Quantity:
Worktop Cutter ½" TCT cutter with 12mm shank		Half inch cutter 4" long ( 100mm) for 12mm collet	£	Quantity:
Jig Carry Bag for 720 template		Black polyester carry bag with handles	£	Quantity:
Solo Clamp		Simple one handed operation 150mm jaw opening	£	Quantity:
Connector bolts More>>>>		150mm long Zinc plated	£	Quantity:
Colorfill More>>>>		Joint sealer & laminate repair compound	£	Choose colour and order